A Linear Fire Pit Insert You Light From a Wall Switch or Remote
This linear fire pit insert gives you one long line of flame along a wall or seating edge, and it lights from a wall switch or a remote, so nobody goes looking for a match or a lighter. It's built from #304 stainless steel and CSA certified for outdoor use, and HPC Fire calls it commercial grade. Pick one of seven lengths, or join pans for a longer run, and you have a feature worth showing off.
Key Features
- Electronic ignition: hot surface ignition with flame monitoring, so you never keep a lighter by the fire.
- CSA certified build: #304 stainless steel, 18 gauge, fully assembled and 100% burn tested.
- Seven lengths: all 8 inches wide, from 25x8 to 121x8, so the flame fits your wall or seating edge.
- Joinable pans: 1.5 inch deep Interlink pans join into one continuous line of flame.
Questions about this product? Call (888) 883-7568 or email contact@resortsdepot.com
The Full Picture
This linear fire pit insert uses the Torpedo burner only. Hot surface ignition with flame monitoring lights it, and a thermocouple shuts off the gas if the flame is lost. A drip leg diverts water away from the electronics. It needs 120VAC power at the fire feature.
Specifications
Specifications
| Specification | Details |
|---|---|
| Sizes | 25x8, 37x8, 49x8, 61x8, 73x8, 97x8, 121x8 (all 8 inches wide) |
| Options | Size and Fuel (natural gas or propane, set by SKU) |
| Propane | Fixed piping only, not small tanks |
| Burner | Torpedo |
| Ignition | Electronic ON/OFF, hot surface ignition with flame monitoring |
| Power | 120VAC at the fire feature |
| Control | Remote or wall switch |
| Pan depth | 1.5 inches |
| Material | #304 stainless steel, 18 gauge |
| Construction | Fully assembled, welded gas fitting, weep holes, 100% burn tested |
| BTU (HPC rating) | 25x8: 75k. 37x8: 115k. 49x8: 150k. 61x8: 175k. 73x8: 200k. 97x8: 300k. 121x8: 300k |
| Gas supply pressure | Natural gas 3.5 to 7.0 inches W.C. Propane 8.0 to 11.0 inches W.C. |
| Clearance to combustibles | 36 to 48 inches, depending on size |
| Height above ground | At least 2 inches from the bottom of the insert to the ground |
| Enclosure ventilation | At least two sides ventilated, at least 50% free air space inside |
| Vents | Up to 200k BTU: at least two 18 square inch vents on opposing sides. Above 200k BTU (97x8 and 121x8): at least four vents |
| Certification | CSA certified for outdoor use (decorative gas appliances) |
| Warranty | Stainless steel burner: lifetime. Stainless steel components: 5 years residential, 1 year commercial. Electronic components and gas valves: 3 years residential, 1 year commercial |
What's Included & Warranty
Optional Accessories (Sold Separately)
- ON/OFF remote (578-C): an alternative to the wall switch.
- Enclosure vents: sold as a set of 2. Check the vent count for your size in the spec table.
- Lava rock, rolled lava stone and fire glass
- Glass wind guards: see their page for the sizes available.
- Ready to finish rectangle kit: uses the 37x8 and 49x8 Interlink as its rectangular fire pit insert.
Warranty & Certifications
- HPC Fire warranty: lifetime on the stainless steel burner, 5 years residential and 1 year commercial on stainless steel components, 3 years residential and 1 year commercial on electronic components and gas valves.
- CSA certified: for outdoor use as a decorative gas appliance.
- Authorized dealer: Resorts Depot is an authorized HPC Fire dealer.
Frequently Asked Questions
Pick the length that runs your wall or seating edge, in natural gas or propane. Talk through your wall length, fuel and venting with a Resorts Depot product expert.