Build a Fire Pit That Matches Your Space with This Ready to Finish Fire Pit Kit
The HPC Fire Ready to Finish Square Electronic Ignition Fire Pit Kit is a 45 inch square enclosure you finish in the style your build needs, and the fire insert comes fully assembled with it. You skip designing the frame and the venting, and you pick natural gas or propane and a standard or Torpedo burner to suit your property.
Key Features
- Unfinished cement board shell: 1/2 inch board on a welded steel frame, so you choose the finish
- Assembled CSA certified insert: 25 inch bowl pan, 18 inch Penta burner, 125,000 BTU on the standard burner
- Full open bottom venting: meets HPC's venting requirement with no vents to cut; plan for drainage
- Electronic ignition: starts from a wall switch and shuts down if the flame blows out
Set the kit where your build calls for it and bring fixed piping and a 120VAC circuit to it. With a ready to finish fire pit kit, your time goes into the part people see. The Torpedo version adds nozzles to the Penta burner, and HPC calls it commercial grade. This square fire pit kit has a CSA certified insert, so it works for a backyard or a commercial property.
Specifications
Specifications
| Specification | Details |
|---|---|
| Model number | U45S/25SSCEK |
| Enclosure size | 45 in x 45 in x 18 in tall |
| Enclosure construction | Welded steel frame (.065 mild steel), 1/2 in cement board shell |
| Enclosure weight | 150 lb |
| Cladding area | 34 sq ft |
| Insert | PENTA25EI, 304 stainless steel |
| Pan | 25 in bowl pan, 2.5 in deep with a 1.25 in lip |
| Burner | 18 in Penta burner |
| Output | 125,000 BTU, standard burner |
| Ignition | Electronic, hot surface igniter |
| Fuel | Natural gas or propane, fixed piping only, not for small tanks |
| Gas supply pressure | Natural gas 3.5 to 7.0 in W.C.; propane 8.0 to 11.0 in W.C. |
| Power | 120VAC, 1 amp, GFCI protected circuit |
| Controls | Wall switch required for safety shutoff; remote 578-C, shutoff timer or whole house system optional |
| Overheat shutoff | Gas valve closes if the valve box exceeds 190 F |
| Clearances (up to 200,000 BTU) | 36 in to combustibles (12 in to non combustible), 84 in overhead |
| Venting | Full open venting along the bottom; adequate drainage needed |
| Use rating | CSA certified insert, outdoor use only, commercial and residential use |
| Warranty | Lifetime on the stainless steel burner. Unfinished enclosure: 3 years residential and commercial. Electronic components and gas valves: 3 years residential, 1 year commercial. Pilot assembly: 2 years residential, 1 year commercial. Stainless steel components: 5 years residential, 1 year commercial. Runs from original sale or shipment from HPC and covers parts and in house labor. |
Downloads & Documents
What's Included & Warranty
Included with Your Kit
- Enclosure: steel frame, cement board shell
- Fully assembled insert: PENTA25EI
- Input flex line: for your gas connection
- Instructions: HPC manual
Optional Accessories (Sold Separately)
- On/Off Remote Control (578-C): used with the required wall switch
- Lava Rock: approved media for the pan
- Fire Glass: approved decorative glass for the pan
Warranty & Certifications
- HPC warranty: lifetime on the stainless steel burner. Unfinished enclosure: 3 years residential and commercial. Electronic components and gas valves: 3 years residential, 1 year commercial. Pilot assembly: 2 years residential, 1 year commercial. Stainless steel components: 5 years residential, 1 year commercial. Runs from original sale or shipment from HPC and covers parts and in house labor.
- CSA certified insert: outdoor use only, commercial and residential use