A Square Gas Fire Pit Insert That Lights Without Power at the Pit
The HPC Fire Square Flat Push Button Fire Pit Insert gives you fire at the pit without running power to it. A battery spark igniter lights it, and flame sensing shuts the gas off if the flame goes out, so a blown out flame does not leave gas running. Set it into your enclosure and spend the evening by the fire.
Key Features
- Battery spark igniter: runs on an AA battery, so nothing gets wired at the pit
- Flame sensing: a thermocouple cuts the gas if the flame goes out, and a blowout box shields the pilot
- Up to 250,000 BTU: Standard burner at 30 and 36 inch, Torpedo peaks at 185,000
- Flat pan: made to recess into your enclosure
Questions about this product? Call (888) 883-7568 or email contact@resortsdepot.com
The Full Picture
This square gas fire pit insert goes inside the enclosure you're building. Match the pan to the recommended enclosure size in the specifications, then pick a Standard (Penta) or Torpedo square fire pit burner.
Specifications
Specifications
| Specification | Details |
|---|---|
| Model numbers | FPPK18-SQ-FLEX, FPPK24-SQ-FLEX, FPPK30-SQ-FLEX, FPPK36-SQ-FLEX (Torpedo versions start with TOR-) |
| Pan sizes | 18 x 18, 24 x 24, 30 x 30 or 36 x 36 inch |
| Ignition | Push button with flame sensing, spark ignition by AA battery |
| Burner | Standard (Penta) or Torpedo |
| Heat output, Standard | 90,000 BTU (18 inch), 150,000 (24), 250,000 (30), 250,000 (36) |
| Heat output, Torpedo | 90,000 BTU (18 inch), 140,000 (24), 185,000 (30), 185,000 (36) |
| Recommended enclosure size | 45 inch for the 18 inch pan, 54 inch for the 24, 30 and 36 inch pans |
| Venting | Up to 200,000 BTU: at least 2 vents of 18 square inches each on opposing sides. Above 200,000 BTU: at least 4 |
| Flex line | 36 inch standard |
| Material | 304 stainless steel |
| Gas supply | Natural gas and standard propane: fixed piping only, not small tanks. Small tank versions: 18 and 24 inch, propane only, 90,000 BTU, tank at least 54 inches from the fire pit, tank not supplied |
| Gas pressure | Natural gas 3.5 to 7.0 inches W.C., LP 8.0 to 11.0 inches W.C. |
| Use | CSA certified, outdoor use only, commercial and residential use |
| Certification | ANSI Z21.97 |
| Warranty | Stainless steel burner: lifetime. Stainless steel pan and valve box: 5 years residential, 1 year commercial. Electronics and gas valve: 3 years residential, 1 year commercial. Pilot assembly: 2 years residential, 1 year commercial |
Downloads & Documents
What's Included & Warranty
Included with Your Square Flat Push Button Insert
- Pan and burner: flat stainless steel pan, Standard or Torpedo burner
- Control box: valve knob and push button igniter
- Blowout box and 36 inch flex line
Optional Accessories (Sold Separately)
- Media: HPC Fire Lava Rock | 657 or HPC Fire Glass, 10lbs | FPGL
- HPC Fire Square Glass Wind Guards: WG25-SQ to WG43-SQ, by pan size
- Enclosure vents: HPC Fire 8x4 Stainless Steel Enclosure Vents (set of 2), HPC Fire 12x6 Stainless Steel Enclosure Vents (set of 2) or HPC Fire 14x4.5 Stainless Steel Louvered Enclosure Vents (set of 2)
- Deck insulation kits: FPI-DECK20SQ and FPI-DECK39SQ, required on wood or composite decks
Warranty & Certifications
- Warranty: stainless steel burner lifetime, pan and valve box 5 years residential and 1 year commercial, electronics and gas valve 3 years residential and 1 year commercial, pilot assembly 2 years residential and 1 year commercial
- Certification: CSA certified, ANSI Z21.97
Frequently Asked Questions
Check gas pressure and pan size before you build. Talk through your enclosure and fuel choice with a Resorts Depot product expert.